[for "Fraud Fighter", UV Counterfeit Detection devices see below.]
Eye-D Cam DEVICES
NON-SWITCHING ID-CAMERA A100-3
SWITCHING ID-CAMERA A200-3
ENCLOSED VISITOR CAMERA & ID-CAMERA A200-3-2
MOUNTING BRACKET FOR A100 & A200
ID/VISITOR, RECORDER SYSTEM A200-DVR
Fraud Fighter Counterfeit Detection Equipment
ID RECORDER PACKAGE/SYSTEMS
RELATED CCTV DEVICES
COLOR BULLET CAMERA
COLOR DOME CAMERA
DIGITAL VIDEO RECORDERS (DVR)
SERVICE AFTER WARRANTY
[Click picture for specifications.]
Weatherproof housing and sunshield for A100-3 and A200-3
This device is designed to house the Eye-D Cam A100-3 or the A200-2.
The A100-3 or the A200-3 may be purchased with the housing or separately.
It will also house installer supplied equipment such as Fiber optic
and UTP transmission equipment.
Please notice that an external camera used to view the visitor may be required at an additional cost.
- The housing and sunshield are to be mounted on a flat surface, at least 12" x 12 ".
- Mounting flanges are provided on both the housing and the sunshield with holes on either side for #8 screws or bolts.
- A heater and thermostat are provided.
- The housing is to be installed first, using the center holes on each flange.
- Once the housing is installed the sunshield may be installed, securing both the housing and sunshield.
- A one inch diameter hole is provided on the right side for installing conduit.
- A section of the housing is set aside for user supplied equipment, such as Fiber or UTP transmitters.
- 120 vac power is to be provided separately, outside of the housing.
- A false floor is provided to allow visitors to easily retrieve dropped ID cards.